Family-run workshop · since 1984
Made-to-measure self-supporting stairs
Self-supporting stairs are wooden stairs whose flight does not rest on a heavy core or supports beneath the treads. The treads are supported by side stringers, and the whole staircase is fixed to the walls. This gives it a light appearance and lets us adapt it to your interior almost like a piece of furniture. At Schody-Q, we design and make self-supporting stairs to measure in three colour schemes: Q1, Q2 and Q3. Send photos of the opening and a few measurements, and we will prepare a design free of charge.

Made to measure
We design every staircase for your opening and interior
Free 3D design
Photos and the dimensions of the opening are all we need
CNC manufacturing
Components cut to a digital design
Installation in Poland and the EU
We deliver and install the stairs at your home

a light structure
What are self-supporting stairs?
On self-supporting stairs, the side load-bearing components—stringers—support the treads, and we fix the stairs to the walls. There is no concrete core or posts beneath the flight, so the staircase has a light, open form. This applies to both straight stairs and stairs with winder turns.
We make wooden self-supporting stairs from native beech, oak and ash, as well as exotic merbau, mahogany and American walnut. We glue the timber, machine it on CNC according to a digital design, then stain or lacquer it. If you need a timber covering for existing concrete stairs instead of a self-supporting structure, see our stairs over concrete.
one, two or three colours
Q1, Q2 and Q3: one, two or three colours
The construction is the same; the colour scheme differs. Find full descriptions and photos on the model pages. Here are the main differences.
| Model | Colours | Treads | Stringers and structural elements | Balustrade infill | More |
|---|---|---|---|---|---|
| Q1 | 1 colour | Natural wood (oak, ash or exotic species) | Wood colour | Wood colour | Q1 stairs |
| Q2 | 2 colours | Natural wood shade (handrails and sometimes posts too) | Any opaque RAL colour, such as “loft” black or “white” | Same colour as the stringers | Q2 stairs |
| Q3 | 3 colours | Natural wood shade | Any colour | Contrasts with the stringers | Q3 stairs |
Stairs Q1Self-supporting stairs in a single wood colour.
Stairs Q2Self-supporting stairs in two colours: wood with white or black.
Stairs Q3Self-supporting stairs in three colours.
For Q1, we brush the wood and finish it with hardwax oil. You can also choose a stain from the colour chart or lacquer. See our colour charts. They are for guidance, not exact standards, so we prepare a sample finish before you choose a colour.
We call Q2 with black stringers “loft” and with white stringers “white”. It is a self-supporting wooden staircase: we paint the stringers and balustrade infill in the colour of your choice, while the treads keep the natural colour of the wood.


stringers
Construction: housed, saddled, bolt-fixed and suspended stringers
Stringers can have different constructions. We make self-supporting stairs with:
- housed stringers,
- saddled stringers (including stairs on a single beam),
- bolt-fixed stringers,
- suspended stringers.
You can choose the shape of the stringers, posts, spindles and handrails, then see the result in a 3D design. Additional options include a volute handrail and curved stringer at the bottom of the flight, semi-circular treads, a smooth handrail-to-post transition, round posts in wood or wood and acid-resistant steel, and cut-outs for halogen lights.
Q1, Q2, Q3 stringer stairs with housed treads
Q1, Q2 and Q3 are stringer stairs with housed treads. This light load-bearing structure is suitable for both masonry houses and timber-frame houses. Q1, Q2 and Q3 stringer stairs are the most rigid and technically compact construction among all our stairs. Stairs on one load-bearing beam are a separate range: Q Belek stairs, with a clad beam in any colour and natural wood treads.

straight or turning
Stair layout
Straight stairs made to measure
Straight stairs have one flight from the ground floor to the upper floor. You do not choose them from a catalogue of fixed sizes; we design them to fit your opening, using its width and length, total floor-to-floor height and ceiling thickness.
Winder stairs: L, U, C and S shapes
If there is not enough room for a long flight, the stairs can turn. We make self-supporting stairs with winder turns in L, U, C and S shapes, as well as with angled cuts, chimney details and semi-circular elements. Our page about self-supporting stairs with winder turns explains when to choose winders or a landing. We also make cut-string stairs with L or U turns.

appearance
A light appearance
Our showroom displays a range of styles, from contemporary structures with a light appearance to classic solid wooden stairs. Self-supporting stairs are among the visually lighter options: the flight does not rest on a massive core, and you can finish the stringers and balustrade infill in colours that define their character, from natural wood to “loft” black. A 3D design will show how the stairs look in your interior.
other stair types
Self-supporting stairs compared with other types
Not every staircase needs to be self-supporting. We also make:
- cut-string stairs from laminated timber, with treads, risers and a wall-side stringer in a zigzag,
- stairs on a beam, the Q Belek range,
- spiral and curved stairs,
- stairs over concrete, timber fitted over an existing structure.
If you are unsure which type suits your home, send photos of the opening. Using the dimensions and height, we will explain what is possible and show it in a 3D design.

species and grades
Wood, grades and finish
We prepare quotes as standard for Nature-grade wood. A higher grade costs extra and must be requested before the deposit is paid. We offer Rustic, Nature, Select and Exclusive grades, veneered timber and laminated timber. Grades other than Exclusive may include repairs around knots and cracks, matched to the wood, black or filled with resin. We describe wood species and colours in more detail on our page about wood species and colours.

infills
Balustrade
Choose balustrade infill to suit the stairs: wooden spindles, spindles combined with metal, acid-resistant steel rods and tubes, horizontal or vertical boards, or safety glass. Find out more on our page about stair balustrades.
price
How much do self-supporting stairs cost?
from PLN 14,980
The example price from PLN 14,980 applies to Q1 stairs in ash, oiled, with a balustrade of black vertical rods, in standard dimensions, including installation and transport. We price other models and configurations after preparing the design, as we design and price each staircase individually.
Factors include the stair type and size, number of treads, wood species and grade, balustrade, installation and transport. Send the opening measurements and photos, and we will explain what increases or reduces the cost in your case.


step by step
How to order
Free remote design
Send photos of the opening from the ground and upper floors, showing as much of it as possible; its width and length in centimetres; the total floor-to-floor height; and the ceiling thickness.
Optional on-site measurement and design
This costs PLN 200–500 net, depending on the distance.
Manufacture
We CNC-cut the components, sand them, then stain or lacquer them.
Installation
We fit the stairs in your home.
Lead time starts at around four weeks, depending on the stair type and materials. We make stairs in Poland and EU countries. You can also meet a designer and view material samples at our Wrocław showroom.
installation
Installing self-supporting stairs
We install the stairs ourselves using our own system: we assemble and fit them, finish the opening, install the balustrade and handrails, and carry out minor finishing work. Since we fix the stairs to the walls, please mark where cables and pipes run or send plans from your electrician and plumber. For stairs enclosed by walls on three sides, we leave a clearance and later cover or fill it with acrylic. The lacquer fully hardens about 14 days after installation. Details are in our payment and installation information.
FAQ
Frequently asked questions
What are self-supporting stairs?
They are stairs whose flight does not rest on a core or supports beneath the treads. The treads rest on stringers, and the structure is fixed to the walls. This gives the stairs a light form.
How much do self-supporting stairs cost?
The example price from PLN 14,980 applies to Q1 stairs in ash, oiled, with a balustrade of black vertical rods, in standard dimensions, including installation and transport. We price other models and configurations individually. The final amount depends on the stair type and size, number of treads, wood species, balustrade, installation and transport. Send photos and measurements of the opening, and we will prepare a free design.
What should I send to get a free design?
Photos of the opening from the ground and upper floors, ideally showing as much of it as possible; the opening width and length in centimetres; total floor-to-floor height; and ceiling thickness. We will prepare a remote design from this information. If an on-site measurement is needed, it costs PLN 200–500 net, depending on the distance.
How long does it take to make self-supporting stairs?
From about four weeks, depending on the stair type and materials. We confirm the schedule in the offer after preparing the design.
How do Q1, Q2 and Q3 differ?
The construction is the same; the colour scheme differs. Q1 is one colour: natural wood. Q2 has natural treads and RAL-painted stringers and balustrade infill. Q3 adds a third colour: the stringers and other components can be any colour, while the balustrade infill contrasts with them.
Modular stairs or made-to-measure stairs: what is the difference?
Modular stairs are a shop-bought kit of components in fixed sizes, assembled by you or a contractor. We design made-to-measure stairs from scratch for your opening, height and ceiling. We choose the wood, colours, balustrade and layout, CNC-produce the components and install the stairs ourselves. The approaches and prices differ. A kit can make sense if standard sizes fit; a made-to-measure design is for stairs tailored to your interior.
Are self-supporting stairs suitable for timber-frame or wooden houses?
Yes. Our Q1, Q2 and Q3 self-supporting stairs are stringer stairs with a light load-bearing structure that is suitable for both masonry houses and timber-frame houses. Find out more on our page about stairs for wooden and timber-frame houses.
Can self-supporting stairs have winder turns?
Yes. We make winder layouts in L, U, C and S shapes. Details and a comparison with a landing are on our page about self-supporting stairs with winder turns.
Are self-supporting stairs a light structure?
Visually, yes: the flight does not rest on a massive core, so the open form does not overwhelm the interior. We choose the installation method in the design to suit your opening, walls and ceiling.
What stairs are popular now?
Popular choices include light natural wood, two-colour finishes with black or white stringers, and an open, light form. Read more in our guide, What stairs are popular now?.







